Q3. You intend to connect your PC directly to a Cisco router. Which of the following allow you to connect to the router directly?
A. Connect PC’s COM port to the router’s console port using a patch cable.
B. Connect PC’s COM port to the router’s console port using a straight through cable.
C. Connect PC’s COM port to the router’s console port using a rollover cable.
D. Connect PC’s COM port to the router’s console port using a rollover cable.
Correct Answer: C
Explanation:
There are different types of cables:
1. Straight through cable: This is also known as patch cable. A straight through cable is used to connect a computer to a hub or a switch.
2. Crossover cable: A crossover cable is used to connect one computer to the other computer B without using a switch or hub.
3. Rollover cable: A rollover (also known as console cable) is used to connect to routers for configuration purpose.
Also, you can't connect the Ethernet port on PC to another Ethernet port on a router using a straight through cable. You need crossover cable for this purpose. Also, the PC need to have a network card, and appropriate networking protocol stack properly installed and configured.
Disclaimer: Simulationexams.com is not affiliated with any certification vendor, and Sim-Ex™ Practice Exams are written independently by SimulationExams.com and not affiliated or authorized by respective certification providers. Sim-Ex™ is a trade mark of SimulationExams.com or entity representing Simulationexams.com.CCST™ is a trademark of Cisco® systems
